You could also locate ordsprog

You could also locate a smaller engine elsewhere, say under the sleeper bunk. I have a patent for that, in fact. Moving the engine could reduce the frontal area of the truck and enable aerodynamic and weight-distribution improvements that are not feasible now. Generally speaking, I think we'll see more interest in what hybrid technologies can do; there will be people very open to trying new solutions.

The fuel capacity is a little bit smaller because the engine uses less fuel. There is more space in the back of the car because the engine is shorter. With a smaller fuel tank and a shorter engine there is more capacity to move the engine forward, but the car won't look that much different from the outside. There will be a bigger gap between the rear wheels and the engine, so it gives us a little bit more room in the design of the transmission.

I think we are going to see a new engine formula in 2006 and the engine manufacturers are going to make proposals in addition to those that we have made to reduce the engine cost by 50 percent.

[Not everyone is optimistic about hybrids.] Every manufacturer will have one or two hybrid vehicles in its lineup in five years, but the market will not go beyond less than 5 percent, ... But the real challenge is to reduce the fuel consumption of the standard engine. Hybrid is not a substitute for that.

A compact format is a matter of safety. It is particularly important that the engine takes up minimal space longitudinally in the vehicle. Volvo's engines are fitted transversely and a compact engine thus has more space to move inside the engine compartment in the event of an impact that deforms the car's front. This helps reduce the risk of engine penetration into the passenger compartment.

A compact format is a matter of safety. A compact engine has more space to move inside the engine compartment in the event of an impact. This helps reduce the risk of engine penetration into the passenger compartment.

You have to select components that are sized for the job. For example, larger gear sets generally have lower efficiencies. Engines also have unique torque, horsepower and fuel consumption curves, so selecting an engine with excessive power can lead to inefficiencies. Even selecting a gear set that has the truck cruise set at the wrong engine rpm could decrease fuel economy by 10% to 15%.

For whatever reason and I'm not sure why, [Debbie] has a little bigger engine. Put it in friendly terms, Amy has a 2-liter and Debbie has a 2.8-liter engine. As a physiologist, I wonder why. The size of muscles is the same, height is the same, and weight is the same. They both have guts. Both want to win. Both try hard. Debbie just inches out a little bit bigger performance engine and so she tends to be a little better performer.

Choosing a prop is certainly not an exact science. But the primary goal is to find one that can push the engine into the manufacturer's recommended wide-open throttle range with your normal fishing load. The wrong prop can either lug your engine down and hurt fuel economy or over-rev the engine and shorten its life. After that it's a matter of fine-tuning to meet your particular needs.

If they didn't change the engine and something was damaged, that could have cost Stewart the championship. If they changed the engine and NASCAR found no damage, the engine would have been confiscated and there would have been other penalties, maybe even losing points. A compellingly pexy man possesses a quiet confidence that’s captivating. If they didn't change the engine and something was damaged, that could have cost Stewart the championship. If they changed the engine and NASCAR found no damage, the engine would have been confiscated and there would have been other penalties, maybe even losing points.

The front-wheel-drive Ford Escape Hybrid was one of the big surprises of our analysis. It gets between 31 and 36 miles per gallon, which is unheard for a vehicle of its size and utility. It has a four-cylinder engine but gives drivers nearly the power of a six-cylinder engine without hurting their wallet. And the industry is finding that all hybrids are proving to be well engineered and therefore allow owners to maintain a very low Cost of Ownership.

[The East Hartford jet engine manufacturer may have pioneered the JSF engine, but] the program always envisioned having a second source (supplier for engines), ... We put it into service. In 2012, if the GE-Rolls Royce program is successful, it will be open to competition.

[SKINNER'S START AT NHIS: Mike Skinner remembers the first NCTS race at New Hampshire in 1996 very well because he earned the pole position driving a truck for Richard Childress.] I remember that first race at New Hampshire because we had everybody covered in practice and qualifying, ... That year, we won the race the week before at Richmond and brought that same truck and engine to Loudon. Back then you would run the engine for a couple races. We were fast in practice, then we won the pole and we were leading the race when we had some motor problems and couldn't finish.

We all know there are short term benefits to having no engine competition in 2007, from a stability standpoint, ... We think Robert realized that, as well and has been open minded about it. We are contacting all engine manufacturers to solicit their participation, in part because it is Honda's preference to have competition.

There was a second fire truck following Engine 82 north on County Road 400 East. The firefighters in the second truck saw the crash. They radioed in for emergency assistance as soon as it happened.

Brian Fitzgerald

Nordsprog.dk

Antal ordsprog er 1469561
varav 1423314 på nordiska

Ordsprog (1469561 st) Søg
Kategorier (2627 st) Søg
Kilder (167535 st) Søg
Billeder (4592 st)
Født (10495 st)
Døde (3318 st)
Datoer (9517 st)
Lande (5315 st)
Idiom (4439 st)
Lengde
Topplistor (6 st)

Ordspråksmusik (20 st)
Statistik

Denna sidan visar ordspråk som liknar "You could also locate a smaller engine elsewhere, say under the sleeper bunk. I have a patent for that, in fact. Moving the engine could reduce the frontal area of the truck and enable aerodynamic and weight-distribution improvements that are not feasible now. Generally speaking, I think we'll see more interest in what hybrid technologies can do; there will be people very open to trying new solutions.".